Circular Carbide Cut-Off Saw Blades, Carbide Saw Blades: Martindale

Española

Français

CLICK HERE for Printable Version of this page.

Carbide Cut Off Saws
(Available in High-Speed Steel, upon Request)

C-2 Carbide

Hollow Ground
For Side
Clearance

Rake Angle
of Teeth: 5° Pos.

Keyways are
optional at
extra cost

These carbide cut off saw blades are used on rotary cut off attachments. The carbide cut off saws are made from
C-2 Micro Grain Carbide and are produced to very close tolerances.

Tolerances:
O.D. = ±.005,
Thickness = ±.0005
I.D. = +.001 -.000
(Closer tolerances available at additional cost.)

RESHARPENING SERVICE
Complete resharpening
service is available.

COATING SERVICE
TiN, TiCN and other surface
coatings are available.

STOCK SAWS
	O.D.	3"	3-1/2"	4"	4-1/4"
Thickness	Hole	1"	1"	1"	1"
Thickness	No. of Teeth	90, 120	90, 120	90, 120	90, 120
.064"		XSAD064	XSAK064	XSAE064	XSAO064
.045"		XSAD045	XSAK045	XSAE045	XSAO045
.032"		XSAD032	XSAK032	XSAE032	XSAO032

Carbide Cut Off Saws (Available in High-Speed Steel, upon Request)

Carbide Cut Off Saws
(Available in High-Speed Steel, upon Request)