 |
Above: Object to be demagnetized is drawn slowly
across surface.
Right: Model D-3 used in inverted position to demagnetize a surface
plate. |
 |
|
|
Demagnetizers Keep Tools
-Free of Metal-Slivers and Chips-
-Saves Production Time-
-Reduces Cost of Tool Maintenance- |
|
Demagnetizing Is
Quick and Easy
To demagnetize a cutting tool (or a metal part
that has acquired magnetism from a magnetic chuck) you merely draw
it slowly back and forth across the pole of the Model D-3 and then
slowly draw it away. As the tool passes repeatedly through the
magnetic field, its magnetism becomes progressively weaker.
After a few seconds it is entirely demagnetized and can be put back
into efficient operation. |
|
Demagnetizing Large
Parts
in cases where it is not convenient to move
the part. Model D-3 can be held upside down by its handles and
passed over the part until its entire surface has been exposed.
A foot switch leaves both hands free when the demagnetizer is in use
and assures the current being turned off when not in use.
Model D-3 is powerful, it draws 12 amperes. |
| |
Catalog Number |
| Model D-3
Demagnetizer, 115 V., 60 Hz. |
DEMGD3A |
|
Net Weight 19 lbs., Shipping Weight 20 lbs. |
|
|
