Universal Undercutter: Martindale Electric

Española

Français

CLICK HERE for Printable Version of this page.

Martindale Universal Undercutter

Features:
→Undercuts any size commutator. Excellent for small commutators.
→Uses either V-Cutters for "V" slots or saws for "U" slots.
→Direct drive: Flexible Shaft = 1/3 h.p. motor; 2850/3450 r.p.m.
→Drive Shaft is extremely flexible and light, though sturdy (No.14 Core and Sheath; 1/4"diam. × 3 ft. long)

The Universal Undercutter is similar to the Imperial Undercutter Under the sub-category Undercutters. This unit uses only a 1/2" diameter saw and comes with two slot guides.

Universal Undercutter with motor as pictured at left	Catalog Number
115 V., 50/60 Hz.	UNVU100A
230 V.,50/60 Hz.	UNVU100B
Universal Undercutter with flexible shaft and Ball Bearing Swivel Connection for use with your motor
with1/2" motor connection	UNVU10112
with 5/8" motor connection	UNVU10158
with 10mm. motor connection	UNVU10110MM
with 14mm. motor connection	UNVU10114MM
No. 14 Core (Replacement for flexible shaft)	MFLXD75
No. 14 Sheath (Replacement for flexible shaft)	MFLXD54
No. D-363 Reducer	MFLXD363
No. 2 Steel Carrying Case for electric Imperial	CASE102
Net Wt. with motor, 24 lbs.; without motor, 3-1/2lbs.

Equipped with Depth Gauge and 2 slot Guides. The angled slot guide is for use on commutators up to 7" diameter. The 1/2" diameter saws allow cutting to within 1/4" of riser.

High Speed Steel Saws and V-Cutters
(See Metal-Working & Mica Saws / Mica Undercutting Saws & V-Cutters, for Saw and Cutter Specifications)

	O.D.	I.D.	Catalog Number
No.16-HS Saws	1/2"	3/16'	HSMS16
No. 17-VHS Cutters	1/2"	3/16"	HSMSV17